- Manual entitled “Phone Access User's Guide” that is supplied with the voice module. Paging Feature.If programmed, up to four pagers can automatically display certain system conditions as they occur in your system.The display consists of code numbers that indicate the type of condition that has occurred.
- View and Download Honeywell PRO 3000 Series product information online. PRO 3000 Series thermostat pdf manual download.
Honeywell Pro 3000 Access Control Installation Manual 1
View and Download Honeywell Pro 3000 Series installation instructions manual online. Pro 3000 Series thermostat pdf manual download.
Honeywell Pro 3000 Access Control Manual
| Specifications | |
| Input voltage: 120VAC 60Hz; Current: 1.50A max. | |
| Output Voltage: 12VDC or 24VDC, jumper selectable; Current: 2.5A continuous output maximum, 2.0A plus battery charger (not supervised). | |
| Fail safe dry contact output on AC Failure (within one minute). | |
| Built-in charger for sealed lead acid or gel cell type batteries. | |
| Battery presence detection (within 1 minute) | |
| Battery low disconnect at 9.90VDC or 19.90VDC. | |
| High voltage disconnect at 15VDC or 30VDC. | |
| Yellow LED (L3) indication for battery disconnected and battery low. | |
| Fail safe dry contact output for Battery trouble (Fail Safe). | |
| Battery polarity reversal protection. | |
| Thermal overload and short circuit protection. | |
| DC output PTC activated indication by Red LED (L2). | |
| DC output failure indication by Red LED ( L4 ). | |
| AC presence indication by Green LED ( L1 ). | |
| DC output indication by Red LED ( L5 ). | |
| Battery Leads included. | |
| Power Board Dimensions: 5”L x 3.9”W x 1.5”H. | |
| Enclosure Dimension: 17”L x 13.5”W x 4.75”H. Accommodates two 12 Volt 12AH batteries. When using larger batteries, a UL approved enclosure must be used. | |
| UL Listed for Access Control Systems; UL294. | |
| UL Listed for Burglar Alarm Systems; UL603. | |
| UL Listed for Power Supplies for Fire Protective Signaling Systems;UL1481. | |